 elengdf
Junior Member
. Messages : 10
. Inscrit le : 24/02/2020
. Statut : Hors Ligne
|
 Posté le 24/02/2020 01:08 | | | Submersible Sewage Water Pump manufacturers |
Condition of usage
Medium temperature must not above 40℃
PH range of medium between 6.5-8.5
Volume ration of solid partial content shall be within 0.1mm, and size of solid partial shall be not bigger than 0.2mm
Power supply shall be 220V and 50Hz, voltage is allowed to fluctuate between 0.9 to 1.1 times of its rated voltage
The depth of the pump under water must be less than 5m
Function and feature
WQD series submersible sewage pump is mainly comprised of three parts: pump, mechanical seals and motors. Pump is at the lower part of sewage pump, and the structure is impeller and shell. Motor located at the upper part of the motor pump, which is the single-phase or three-phase electric motor. Mechanical seals are between pump and motor and it is a kind of double end mechanical seals, "o" rings are applied in all static joints of the submersible pump. The motor pumps are widely used in agriculture, mine, environment protection and industry such as drainage slurry, waste water, dung, which contained short fibre,wastepaper, sand, and so on. It is also an ideal equipment for irrigation and clear slit.
Factory advantage
1.Spare parts produced by ourselves
Our company has a sub-company which is the biggest one in our city producing and selling pump spare parts more than 15 years. Most of the pump factories buy spare parts from us. So we can control our quality and price better than others.
2.High quality capacitor
Adopt good capacitor made by the big factory in our city, heat resistant to 860℃, working life is more than 18000 hours.Submersible Sewage Water Pump manufacturers
website:http://www.zjshennongpump.com/submersible-pump/submersible-sewage-water-pump/
|
|
